Waterproof White Dial Gauges with a Retro Look
Fuel
This Fuel Gauge has a flat glass crystal for that retro look. The dial is White that will indicate the level in your fuel tank from E to F
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging. This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. Here are the details for this Gauge: Fixing hole - 52-53mm Bezel diameter - 55.4mm Bezel material - Plastic coated stainless steel. Crystal material - Glass. Body material - Plastic Input - 0 to 190 ohm. Operating Voltage - 9 to 32 VDC £34.00 |
Water TemperatureThis is a 2 inch (52mm) marine control panel gauge.
This Oil Temp Gauge has a flat glass crystal for that retro look. The dial is White that will indicate the temperature of your oil from 50 to 150C (120 -300F). The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging. This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. Here are the details for this Gauge: Fixing hole - 52-53mm Bezel material - Plastic coated stainless steel. Crystal material - Glass. Body material - Plastic Input - 361 to 19 ohm. Operating Voltage - 9 to 32 VDC . £34.00 |
Oil Temperature
This is a 2 inch (52mm) marine control panel gauge.
This Oil Temp Gauge has a flat glass crystal for that retro look. The dial is White that will indicate the temperature of your oil from 50 to 150C (120 -300F). The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging. This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. Fixing hole - 52-53mm Bezel material - Plastic coated stainless steel. Crystal material - Glass. Minimum rear clearance - 51mm. Input - 361 to 19 ohm. Operating Voltage - 9 to 32 VDC £34.00 |
Oil Pressure
This is a 2 inch (52mm) marine control panel gauge.
This Oil Pressure Gauge has a flat glass crystal for that retro look. The dial is White that will indicate the oil pressure (or air pressure) in your systems from 0 to 10 BAR (0 to 145 PSI). The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-fogging. This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. Here are the details for this Gauge: Fixing hole - 52-53mm Bezel material - Plastic coated stainless steel. Minimum rear clearance - 51mm. Input - 361 to 19 ohm. Operating Voltage - 9 to 32 VDC Operating Current < 60mA. £34.00 |
VoltsThis is a 2 inch (52mm) marine control panel gauge.
This 12V Volt Gauge has a flat glass crystal for that retro look. The dial is White that will indicate the Voltage in your electrical system. The 24V looks and works in the same way except for the number range. The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-fogging. This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. Here are the details for this Gauge: Fixing hole - 52-53mm Bezel material - Plastic coated stainless steel. Crystal material - Glass. Minimum rear clearance - 51mm. Input -9 - 16 volts. Operating Voltage - 9 to 32 £34.00 |
Tachometer 3000 RPM
|
Tachometer 4000 RPM
|
This is a 3.5 inch (86mm) marine control panel gauge.
This 12V Volt Gauge has a flat glass crystal for that retro look. The dial is Black that will indicate the engine RPM from 0 to 3000 and will count the number of service hours for your engine
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-fogging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. It is therefore ideal for use in exposed craft such as Narrowboats, Fishing boats, RIBs and Yachts. The crystal is glass and so will not fade as the plastic ones do and the bezel is stainless steel for long life in the marine environment.
Here are the details for this Gauge:
Fixing hole - 85-87mm
Bezel diameter - 90.3mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 70mm.
Input - Pulse from the 'W' output of your alternator or from a speed sensor.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
Operating Temperature -30C to +75C.
Operating humidity - 0% to 100%
Inputs required:
9-32VDC live feed.
Ground.
Signal Input Pulse from the 'W' output of your alternator or from a speed sensor.
Back light feed 9-32VDC.
Back light colour - Red
input type - female spade connector.
Available in 3000, 4000, 6000 and 80000 RPM versions.
£71.00
This 12V Volt Gauge has a flat glass crystal for that retro look. The dial is Black that will indicate the engine RPM from 0 to 3000 and will count the number of service hours for your engine
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-fogging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. It is therefore ideal for use in exposed craft such as Narrowboats, Fishing boats, RIBs and Yachts. The crystal is glass and so will not fade as the plastic ones do and the bezel is stainless steel for long life in the marine environment.
Here are the details for this Gauge:
Fixing hole - 85-87mm
Bezel diameter - 90.3mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 70mm.
Input - Pulse from the 'W' output of your alternator or from a speed sensor.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
Operating Temperature -30C to +75C.
Operating humidity - 0% to 100%
Inputs required:
9-32VDC live feed.
Ground.
Signal Input Pulse from the 'W' output of your alternator or from a speed sensor.
Back light feed 9-32VDC.
Back light colour - Red
input type - female spade connector.
Available in 3000, 4000, 6000 and 80000 RPM versions.
£71.00
