Dragon
  • Home
    • Safety - Safety - Safety
    • Care of your panel
    • Wiring
    • Warranty and fitting
  • Instrument Panels
    • Switch Panels >
      • Bilge Pumps
    • Volvo Penta instrument Panels
    • Yanmar Engine Panels
    • Other Panels >
      • Customer Custom Panels
  • NMEA 2000
    • NMEA 2K Instrument panels
    • NMEA 2000 Cables & Backbone
    • NMEA 2000 Gauges
  • Gauges - Switches - Sensors
    • ECMS Marine Gauges >
      • ECMS Retro Range >
        • ECMS Retro Range White dial
      • ECMS Mermaid Black Dial >
        • ECMS Mermaid Range White
      • ECMS Neptune Black >
        • ECMS Neptune Range White Dial
    • Digital and multi function gauges
    • VDO Gauges
    • Smiths - Lucas style gauges >
      • Smiths - Lucas Style - White Dial
    • Switches >
      • Ignition Key switches
      • Rocker switches
      • Toggle switches
      • Other switches
    • USB / Fuse / Other
  • Contact
  • Tips & Questions
    • Volvo Penta stuff
    • Support Video >
      • Helm & Flybridge
    • VDO Gauges
    • NMEA 2000
    • Switch Panels
    • ECMS Gauges
    • Wiring diagrams
    • Alternator and Sensors
Dragon Switch / Instrument Panels

ECMS digital 2" gauges are all fully water resistant and have glass crystals for extended exposure in a marine environment. All gauges have a red back light.


Water Temperature

Picture
This is a 2 inch (52mm) marine control panel gauge.
This Water Temperature Gauge has a flat glass crystal for that retro look. The dial is Black with a inset LED display that will indicate the level in your fuel tank from 0 to 100%
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment.
Here are the details for this Gauge:
Fixing hole - 52-53mm
Bezel diameter - 55.4mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 51mm.
Input - 10 to 184 ohm.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
£34.00
Picture

Oil Temperature

This is a 2 inch (52mm) marine control panel gauge.
This Oil Temperature Gauge has a flat glass crystal for that retro look. The dial is Black with a inset LED display that will indicate the level in your fuel tank from 0 to 100%
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment.
Here are the details for this Gauge:
Fixing hole - 52-53mm
Bezel diameter - 55.4mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 51mm.
Input - 361 to 19 ohm.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
£34.00

Fuel

Picture
This is a 2 inch (52mm) marine control panel gauge.
This Fuel Gauge has a flat glass crystal for that retro look. The dial is Black with a inset LED display that will indicate the level in your fuel tank from 0 to 100%
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. 
Here are the details for this Gauge:
Fixing hole - 52-53mm
Bezel diameter - 55.4mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 51mm.
Input - 0 to 190 ohm.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
£34.00

Volt 

Picture
This is a 2 inch (52mm) marine control panel gauge.
This Volt Gauge has a flat glass crystal for that retro look. The dial is Black with a inset LED display that will indicate the level in your fuel tank from 0 to 100%
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. It is therefore ideal for use in exposed craft such as Narrowboats, Fishing boats, RIBs and Yachts. The crystal is glass and so will not fade as the plastic ones do and the bezel is stainless steel for long life in the marine environment. 
Here are the details for this Gauge:
Fixing hole - 52-53mm
Bezel diameter - 55.4mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 51mm.
Input - 10 to 184 ohm.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
£34.00

OIl Pressure

Picture
This is a 2 inch (52mm) marine control panel gauge.
This Oil Pressure Gauge has a flat glass crystal for that retro look. The dial is Black with a inset LED display that will indicate the level in your fuel tank from 0 to 100%
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-foging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment.
Here are the details for this Gauge:
Fixing hole - 52-53mm
Bezel diameter - 55.4mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 51mm.
Input - 10 to 184 ohm.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
£34.00
Picture

Running Hours

This is the  'ECMS' brand marine Engine Running Hours gauge. These gauges provide a excellent replacement or new addition to any boat's control system. 
The KUS brand can be used within a wheelhouse or fully exposed on a open boat deck. They have a stainless steel bezel and most gauges have a glass crystal. They are manufactured to be waterproof once mounted and have anti-fogging seals. They have been designed for long-term exposure to the elements and can be used on any type of boat in any temperature zone.
  • No sensor required.
  • Bezel made from SUS 316 Stainless Steel.
  • Indication range 0 to 99999.9 hours.
  • Working Voltage range 8 volts to 32 volts.
  • Installation hole dimension 52mm.

 
Fitting and wiring.
A 52mm hole is required to mount the gauge to. It will mount through up to 20mm thick and is secured with a hand tighten nut. Please do not use tools to tighten as this will damage the gauge. If a water tight seal between the gauge and bulkhead is required a 52mm rubber gasket (not supplied) should be used.
Full wiring instructions are supplied with the gauge as is a waterproof wiring plug with pigtail. If you have a 24v system a resister is supplied to insert into the + side of the wiring.
The gauge has red back light option.
£34.00

Tachometer with Running Hours

Picture
This is a 2 inch (52mm) marine control panel gauge.
This Tachometer has a convex glass crystal and stainless steel bezel which give a very modern look. The dial is black that will indicate the engine RPM from 0 to 10000 and will count the number of service hours for your engine. 
It is possible to select the back-light colour of the Neptune range choosing from Red,green, blue, white, yellow, orange, purple.
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-fogging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. It is therefore ideal for use in exposed craft such as Narrowboats, Fishing boats, RIBs and Yachts. The crystal is glass and so will not fade as the plastic ones do and the bezel is stainless steel for long life in the marine environment. 
Here are the details for this Gauge:
Fixing hole - 51-83mm
Bezel diameter - 54.3mm
Bezel material - stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 70mm.
Input - Pulse from the 'W' output of your alternator or from a speed sensor. 
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
Operating Temperature -30C to +75C.
Operating humidity - 0% to 100%

Inputs required:
9-32VDC live feed.
Ground.
Signal Input Pulse from the 'W' output of your alternator or from a speed sensor. 
Back light feed 9-32VDC.
Back light colour - Red,green, blue, white, yellow, orange, purple
input type - connector with pigtales.
£61.00

Picture

DRAGON MARINE SYSTEMS  quality marine products.
 Instrument Panels wiring harness and engine sensors


Hours

M-F: 8:am - 2pm

Telephone

07513 844841

Email

dragonmarinesystems@gmail.com
  • Home
    • Safety - Safety - Safety
    • Care of your panel
    • Wiring
    • Warranty and fitting
  • Instrument Panels
    • Switch Panels >
      • Bilge Pumps
    • Volvo Penta instrument Panels
    • Yanmar Engine Panels
    • Other Panels >
      • Customer Custom Panels
  • NMEA 2000
    • NMEA 2K Instrument panels
    • NMEA 2000 Cables & Backbone
    • NMEA 2000 Gauges
  • Gauges - Switches - Sensors
    • ECMS Marine Gauges >
      • ECMS Retro Range >
        • ECMS Retro Range White dial
      • ECMS Mermaid Black Dial >
        • ECMS Mermaid Range White
      • ECMS Neptune Black >
        • ECMS Neptune Range White Dial
    • Digital and multi function gauges
    • VDO Gauges
    • Smiths - Lucas style gauges >
      • Smiths - Lucas Style - White Dial
    • Switches >
      • Ignition Key switches
      • Rocker switches
      • Toggle switches
      • Other switches
    • USB / Fuse / Other
  • Contact
  • Tips & Questions
    • Volvo Penta stuff
    • Support Video >
      • Helm & Flybridge
    • VDO Gauges
    • NMEA 2000
    • Switch Panels
    • ECMS Gauges
    • Wiring diagrams
    • Alternator and Sensors