NMEA 2000 instrument panel in black
This panel is plug-and-play NMEA 2000. The only connections to make are to plug the five pin 12mm NMEA 2000 into the NMEA backbone with the 1mtr drop cable attached, Connect the power supply to your backbone with the 1mtr cable supplied and connected. Connect a 12v power supply from your battery to the panel breaker and negative.
The switches are also powered and ready for your wiring.
Operation of the panel:
- The keyswitch has the following functions. Tirn to the left and your nmea 2000 system is energised but the panel is not. Turn to the right and the nmea 2000 and the panel is energised, turn to the right again and the ignition (not wired) is engaged this has a spring return. The switch is waterproof and has a rubber cover.
- The multigage. This is a 85mm NMEA 2000 marine digital multi gauge. NMEA 2K plug and play the only wiring required is to plug the single wire into your NMEA backbone using the fitted drop cable 1mtr.
Engine speed ; 0 to 9999 RPM
Engine oil pressure ; 0 to 10 Bar
Water Temperature ; 40 to 120 C
Battery voltage ; 0 to 32 volts
Engine running hours; 0 to 999999
Warning for Oil pressure - Water temo - voltage
316 stainless steel bezel
IP-67 waterproof. Rust proof. UV protection. anti-fogging
- The panel also has a USB twin power supply and six switches. This panel is custom made for each customer so can reflect the switch text that you need for your boat. All switches are water proof and the USB has a water proof cover.