ECMS Retro Style Tachometer gauge Black Bezel, Black Dial
This is a 3.5 inch (86mm) marine control panel gauge.
This Gauge has a flat glass crystal for that retro look. The dial is Black that will indicate the engine RPM from 0 to 3000, 0 to 4000, 0 to 5000, 0 to 6000, 0 to 8000 and will count the number of service hours for your engine
The gauge is 100% water resistant and includes a mechanical rubber seal between the gauge and the bulkhead with outstanding anti-fogging.
This is a very high quality ECMS gauge that has been designed to give long trouble free service exposed to the marine environment. It is therefore ideal for use in exposed craft such as Narrowboats, Fishing boats, RIBs and Yachts. The crystal is glass and so will not fade as the plastic ones do and the bezel is stainless steel for long life in the marine environment.
Here are the details for this Gauge:
Fixing hole - 85-87mm
Bezel diameter - 90.3mm
Bezel material - Plastic coated stainless steel.
Crystal material - Glass.
Body material - Plastic
Fixing method - rear screw thread hand tightened.
Minimum rear clearance - 70mm.
Input - Pulse from the 'W' output of your alternator or from a speed sensor.
Operating Voltage - 9 to 32 VDC automatic voltage compensation.
Operating Current < 60mA.
Operating Temperature -30C to +75C.
Operating humidity - 0% to 100%
9-32VDC live feed.
Signal Input Pulse from the 'W' output of your alternator or from a speed sensor.
Back light feed 9-32VDC.
Back light colour - Red
input type - female spade connector.