4 way joystick control panel - Winch and Boom control panel
This is a new UK manufactured 4 way control panel.
The panel is 150x150 mm in size.
The joystick is 85mm high
12v or 24v
There is a ON/OFF switch so that the joystick can not be operated by mistake, when the switch is on the 'Running' light is on as a reminder.
The joystick has a single 5amp input and four seletable 5amp outputs. It is only possibe to select one output at a time. As you move the joystick you always pass through the OFF position. At this time neither of the two options are powered.
Only light finger tip pressure is required to operate this switch.
Diagional movement is restricted to a few mm and no operation is selected. As you move the joystick from side to side and up and down, you feel the joystick move so far then lock into the position for that function.
When that function is powered the indicator light is lit.