Bilge Pump Control Panel
This is our most popular Bilge pump panel by a very long way.
The panel has three modes:
OFF - There is no power to the pump/s however the power light is on to show that there is power to the system if required. This is a fail-safe to show you if you have cut the power to the pumps.
ON - The pumps (up to 14 amps without switching relay) are energized the power light is on and the pump light is on.
Auto - When the switch is in Auto the panel is set into standby mode. The power light is on but nothing else is showing. Once the float switch is tripped the alarm light comes on and the buzzer will sound and the pumps will be energized. If allowed to drain the panel will reset to standby once the float switch is back to off.
Wiring required by you:
- Positive and Negative feed to the panel.
- Wire from the panel to the float switch and back to the battery negative.
- Wire from the panel to the pump/s and back to the battery negative.