Dragon
  • Home
    • Safety - Safety - Safety
    • Care of your panel
    • Wiring
    • Warranty and fitting
  • Instrument Panels
    • Switch Panels >
      • Bilge Pumps
    • Other Panels >
      • Customer Custom Panels
  • NMEA 2000
    • NMEA 2K Instrument panels
    • NMEA 2000 Cables & Backbone
    • NMEA 2000 Gauges
  • Gauges - Switches - Sensors
    • ECMS Marine Gauges >
      • ECMS Retro Range >
        • ECMS Retro Range White dial
      • ECMS Mermaid Black Dial >
        • ECMS Mermaid Range White
      • ECMS Neptune Black >
        • ECMS Neptune Range White Dial
    • Digital and multi function gauges
    • VDO Gauges
    • Smiths - Lucas style gauges >
      • Smiths - Lucas Style - White Dial
    • Switches >
      • Ignition Key switches
      • Rocker switches
      • Toggle switches
      • Other switches
    • USB / Fuse / Other
  • Contact
  • Tips & Questions
    • Support Video >
      • Helm & Flybridge
    • VDO Gauges
    • NMEA 2000
    • Switch Panels
    • ECMS Gauges
Dragon Switch / Instrument Panels

Fitting a new panel

2/13/2019

0 Comments

 
Hi Dave,
It was nice to hear things are busy for you. Attached are some photos of the panel and loom etc that you supplied to myself. Any help you can give me regarding connecting this up would be great.
Best regards
Ian McCuaig.

Hi Ian
You need to clear a day or two when you can work on this. If you are confident doing this work yourself you need some on site support, 12v will not give you a shock but can cause a fire.
The sensors are small one temp, fat one oil, third one revcounter and there should be a box with all the bits for the fuel sensor.
Take one wire at a time look at the back of the you are working on and you will see that there are three lugs one marked + one marked - and one marked 'S' that is the only one that you need to worry about. Follow that colour wire to the end and fit the sensor. You should be doing this at home with a cup of tea!
Once you have done that for all 4 gauges you should just have the start switch and the pos and neg. The start switch goes to the 85 lug on your relay. The pos needs to go through a 10amp fuse.

Once we are at that stage get back to me for the next installment but you should have a good idea of what is going where on your engine now.
​

0 Comments



Leave a Reply.

    Author

    The purpose of this blog is to help. Please ask your questions and give your feedback and observations.

    Archives

    October 2019
    May 2019
    February 2019
    October 2018
    September 2018
    June 2018
    May 2018
    March 2018
    February 2018

    Categories

    All
    Fuel Tank
    Fuse & Relay
    Gauges
    Starting Pre Heat & Prime
    Starting Pre-Heat & Prime
    Wiring

    RSS Feed

    View my profile on LinkedIn
Picture

DRAGON MARINE SYSTEMS  quality marine products.
Lister Petter Instrument Panels wiring harness and engine sensors


Hours

M-F: 8:am - 2pm

Telephone

07513 844841

Email

dragonmarinesystems@gmail.com
  • Home
    • Safety - Safety - Safety
    • Care of your panel
    • Wiring
    • Warranty and fitting
  • Instrument Panels
    • Switch Panels >
      • Bilge Pumps
    • Other Panels >
      • Customer Custom Panels
  • NMEA 2000
    • NMEA 2K Instrument panels
    • NMEA 2000 Cables & Backbone
    • NMEA 2000 Gauges
  • Gauges - Switches - Sensors
    • ECMS Marine Gauges >
      • ECMS Retro Range >
        • ECMS Retro Range White dial
      • ECMS Mermaid Black Dial >
        • ECMS Mermaid Range White
      • ECMS Neptune Black >
        • ECMS Neptune Range White Dial
    • Digital and multi function gauges
    • VDO Gauges
    • Smiths - Lucas style gauges >
      • Smiths - Lucas Style - White Dial
    • Switches >
      • Ignition Key switches
      • Rocker switches
      • Toggle switches
      • Other switches
    • USB / Fuse / Other
  • Contact
  • Tips & Questions
    • Support Video >
      • Helm & Flybridge
    • VDO Gauges
    • NMEA 2000
    • Switch Panels
    • ECMS Gauges